ASUS SABERTOOTH 990FX R2.0 Manuel D’Utilisation

ASUS SABERTOOTH 990FX R2.0

3-31

The Boot menu items allow you to change the system boot options.

[On] 

Sets the power-on state of the NumLock to [On].

[Off] 

Sets the power-on state of the NumLock to [Off].

[Enabled] 

Enables the full screen logo display feature.

[Disabled] 

Disables the full screen logo display feature.

Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

[Disabled] 

Disables the function.

[Enabled] 

The system waits for the <F1> key to be pressed when error occurs.

[Go to BIOS Setup] 

Enables the DirectKey function and allows you to go to the BIOS  

 

setup when you press the DirectKey button.

[Disable] 

 

Disables the DirectKey function. When set to [Disable], the    

 

DirectKey button will only allow you to turn on or shut down your  

 

computer without going into the BIOS setup.

When set to [Go to BIOS Setup] and the computer is on, the system will shut down when 

you press the DirectKey button. Press the DirectKey button again or the power button to 

reboot and go directly into the BIOS setup.

Main

Ai  Tweaker

Advanced

Monitor

Boot

Tool

Exit

Select the keyboard NumLock state

→←

:  Select Screen

↑↓

:  Select Item

Enter:  Select

+/-:  Change Opt.

UEFI BIOS Utility - Advanced Mode

Boot Configuration

Bootup NumLock State 

 

    On

Full Screen Logo 

 

Enabled

Wait for ‘F1’ If Error 

 

Enabled

DirectKey Enabled 

    

GO to BIOS..

Option ROM Messages 

     

Force BIOS

INT19 Trap Response 

     

Immediate

Setup Mode 

 

EZ Mode

Boot Option Priorities

Boot Override

++E8042_SABERTOOTH_990FX_R2.0_V231   31

9/1/13   3:34:29 PM