ASUS TS700-E7/RS8 Manuel D’Utilisation

5-32

Chapter 5: BIOS setup

Chapter 5

5.4.12 WHEA Configuration

Enable or disable Windows

Hardware Error Architecture.

WHEA Support

[Enabled]

WHEA Support [Enabled]

Allows you to enable or disable the Windows Hardware Error Architecture support.
Configuration options: [Disabled] [Enabled]

5.4.13 APM setting

Specify what state to go

to when power is re-

applied after a power

failure (G3 state).

Restrore AC Power Loss [Last State]
Power On By PCIE

[Disabled]

Power On By RTC

[Disabled]

Restore AC Power Loss [Last State]

When set to [Power Off], the system goes into off state after an AC power loss.

When set to [Power On], the system will reboot after an AC power loss. When set

to [Last State], the system goes into either off or on state, whatever the system

state was before the AC power loss. Configuration options: [Power Off] [Power On]

[Last State]

Power On By PCIE [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Enabled], the items RTC Alarm Date (Days)

and Hour/Minute/Second will become user-configurable with

set values.

Advanced