ASUS TS700-E7/RS8 Manuel D’Utilisation

2-12

Chapter 2: Hardware setup

1.  Unlock a DIMM socket by pressing 

the retaining clip outward.

2.  Align a DIMM on the socket 

such that the notch on the DIMM 

matches the DIMM slot key on the 

socket.

3.  Hold the DIMM by both of its ends, 

then insert the DIMM vertically 

into the socket. Apply force to both 

ends of the DIMM simultaneously 

until the retaining clip snaps back 

into place, and the DIMM cannot 

be pushed in any further to ensure 

proper sitting of the DIMM.

A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force 

a DIMM into a socket in the wrong direction to avoid damaging the DIMM.

Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch 

damage.

To install two or more DIMMs, refer to the user guide bundled in the 

motherboard package.

Refer to the user guide for qualified vendor lists of the memory modules.