ASUS TS700-E7/RS8 Manuel D’Utilisation

TS700-E7/RS8

4-3

1.  Turn OFF the computer and unplug the power cord.
2.  Move the jumper cap from pins 1–2 (default) to pins 2–3. Keep the cap 

on pins 2–3 for about 5–10 seconds, then move the cap back to pins 

1–2.

3.  Plug the power cord and turn ON the computer.
4.  Hold down the <Del> key during the boot process and enter BIOS setup 

to re-enter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper 

default position. Removing the cap will cause system boot failure!

If the steps above do not help, remove the onboard battery and move the 

jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, 

reinstall the battery.

This jumper allows you to clear the  Real Time Clock (RTC) RAM in 

CMOS. You can clear the CMOS memory of date, time, and system setup 

parameters by erasing the CMOS RTC RAM data. The onboard button 

cell battery powers the RAM data in CMOS, which include system setup 

information such as system passwords.