ASUS P9X79 DELUXE Manuel D’Utilisation
ASUS P9X79 DELUXE
3-45
Chapter 3
3.8.4
ASUS Drive Xpert
•
Before using the Drive Xpert function, ensure that you have connected the SATA
signal cables and installed SATA hard disk drives to the
signal cables and installed SATA hard disk drives to the
SATA6G_E1 and SATA6G_E2
connectors.
•
You can only make one Drive Xpert change a time before you save BIOS settings and
restart the computer.
restart the computer.
Drive Xpert Mode
[Normal Mode] Allows you to use the SATA6G_E1 and SATA6G_E2 connectors as normal
SATA connectors.
[Super Speed] Allows you to use the
Super Speed function that combines two hard drives
as one single drive partition.
[EZ Backup]
Allows you to use the
EZ Backup function that copies and maintains an
identical image of data from the SATA6G_E1 drive to the SATA6G_E2
drive.
drive.
When using only one hard disk in
Normal Mode, connect the hard disk to the SATA6G_E1
connector on the motherboard.
•
All original data of the two hard drives will be erased for Super Speed setup.
•
All original data of the SATA6G_E2 hard disk will be erased for EZ Backup setup.
Drive Xpert Device(s) List:
SATA 6G E1 (Gray) / SATA 6G E2 (Gray)
Press <Enter> to display the information of the hard disks which are connected to the
SATA6G_E1 and SATA6G_E2 connectors on the motherboard.
SATA6G_E1 and SATA6G_E2 connectors on the motherboard.
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Exit
Drive Xpert Mode
Back
Tool\
ASUS Drive Xpert >
UEFI BIOS Utility - Advanced Mode
Drive Xpert Setup Utility
Drive Xpert Mode
Normal Mode
Drive Xpert Device(s) List :
> SATA 6G E1 (Gray)
> SATA 6G E2 (Gray)