ASUS MG28UQ Mode D'Emploi
3-10
Chapter 3: General Instruction
USB B Type Cable
Connected PC
USB B Type Cable
Non-connected PC
Power ON
V
V
Power Saving
OSD Charging ON
V
V
OSD Charging OFF
(default setting)
X
X
Power OFF
OSD Charging ON
V
X
OSD Charging OFF
X
X
Note: V= Hub On, X= Hub OFF
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
• Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to the
monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the ON
mode.
• Make sure the signal cable is properly connected the
monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available monitor
to check if the computer is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is properly
installed and activated.