ASUS RS700-E8-RS8 V2 Mode D'Emploi

Chapter 2: Hardware Information

2-16

The barebone server comes with two PCIE slots - PCIE1 and PCIE2. These slots are pre-

installed with a riser card bracket and a butterfly riser card bracket for installing PCIE

expansion cards. You need to remove these expansion card brackets if you want to install

PCIE expansion cards.

The pre-installed riser card bracket on the PCIE1 slot supports Full-Height (FH), Half-Length

(HL) PCIE x16 expansion cards.
To install a PCIE x16 (Gen3 x16 link), FH, HL card on the riser card bracket:

2.

Remove the screw from the metal cover

(A) then remove the metal cover (B)

from riser card bracket.

1.

Firmly hold the riser card bracket then pull it up to detach it from the PCIE x16 slot on

the motherboard.

3.

Get the PCIE expansion card.

4.

Install the PCIE expansion card to the

riser card bracket (A) then secure the

expansion card with a screw (B).