ASUS Q170M-C Manuel D’Utilisation
ASUS Q170M-C
1-23
1.
Insert the Windows
®
7 installation DVD into a USB ODD, or copy all files on the
Windows
®
7 installation DVD to a USB storage device on a working system.
2.
Connect the USB ODD or USB storage device to your 100 series platform.
3.
Insert the ASUS support DVD into a SATA ODD on your 100 series platform.
4.
Power on your system and press F8 during POST (Power-On Self Test) to enter the
boot screen.
Windows
®
7 and USB 3.0 driver for 100 Series
Based on the chipset specification, the 100 series requires USB 3.0 drivers to be preloaded
in order to use USB keyboard/mouse during Windows
®
7 installation. This section is a guide
on preloading USB 3.0 drivers and installing Windows
®
7.
Method 1: Using SATA ODD & USB devices
Load USB 3.0 drivers using the ASUS support DVD and install Windows
®
7 using a USB
device.
Requirement:
•
1 x ASUS support DVD
•
1 x Windows
®
7 installation source
•
1 x SATA ODD
•
1 x USB device (ODD or storage)
•
The USB storage device requires 8 GB or more capacity. It is recommended to format
the storage device before use.
the storage device before use.
•
Use both a USB ODD and a SATA ODD if you want to install Windows
®
7 64-bit UEFI
mode.
1.9
Installing an operating system
•
Motherboard settings and hardware options vary. The setup procedures presented
in this chapter are for reference only. Refer to Windows
®
operating system
documentation for detailed information.
•
Due to Windows
®
7 limitation, before Windows
®
7 64-bit installation, select other OS
item under the Boot menu from Advanced Mode > Boot > Secure Boot > Other OS.