ASUS RS500-E8-PS4 V2 Mode D'Emploi

6-24

Chapter 6: RAID Configuration

The Intel

®

 Rapid Storage Technology enterprise SATA Option ROM utility allows you to 

create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk 

drives that are connected to the Serial ATA connectors supported by the Southbridge.

 

The navigation keys at the bottom of the screen allow you to move through the menus 

and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not 

exactly match the items on your screen.

To launch the Intel

®

 Rapid Storage Technology enterprise SATA Option ROM utility: 

1. 

Turn on the system.

2. 

During POST, press <Ctrl>+<I> to display the utility main menu.

Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have 

set the correct jumper settings of the motherboard, and have set the correct SATA mode in 

the BIOS setup. You can refer to sections Installing hard disk drives, Setting Jumpers, 

and Setting the RAID mode in BIOS for more information.