Manualsbrain.com
  1. Manuels
  2. Marques
  3. ASUS
  4. Z10PE-D8 WS
  5. Mode D'Emploi

ASUS Z10PE-D8 WS Mode D'Emploi

Télécharger
Page de 196
4-27
ASUS Z10PE-D8 WS
USB hardware delays and time-outs
USB transfer time-out [20 sec]
The time-out value for control, bulk, and interrupt transfer.
Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]
Device reset time-out [20 sec]
USB mass storage device start unit command time-out.
Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]
Device power-up delay [Auto]
This is the maximum time the device will take before it properly reports itself to the host
controller.
Configuration options: [Auto] [Manual]
Mass Storage Devices
Generic 8.07 [Auto]
The time-out value for control, bulk, and interrupt transfer.
Configuration options: [Enabled] [Disabled] [Auto]
4.5.13  ASMedia Storage Controller 
Allows you to configure the ASMedia Storage parameters.
ASMedia Storage Controller [AHCI Mode]
This item allows you to enable or disable the ASMedia Storage Controller.
Configuration options: [AHCI Mode] [IDE Mode]
Hot Plug [Disabled]
Allows you to enable or disable the hot-plug support.
Configuration options: [Disabled] [Enabled]
ASPM Support [Disabled]
Allows you to enable the controller ASMP (active state power management) for energy saving 
support
Configuration options: [Disabled] [Enabled]