ASUS Z10PE-D8 WS Mode D'Emploi
ASUS Z10PE-D8 WS
2-35
2.9.2
Internal connectors
1.
Hard disk activity LED connector (4-pin HDLED1)
This LED connector is for the storage add-on card cable connected to the SATA or
This LED connector is for the storage add-on card cable connected to the SATA or
SAS add-on card. The read or write activities of any device connected to the SATA or
SAS add-on card causes the front panel LED to light up.
2.
USB 2.0 connectors (10-1 pin USB910)
These connectors are for USB 2.0 ports. Connect the USB module cables to
These connectors are for USB 2.0 ports. Connect the USB module cables to
connectors USB78 and USB910, then install the modules to a slot opening at the back
of the system chassis. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.