Canon imageCLASS MF249dw Manuel
Configuring Scan Settings (Sending E-Mail)
1469-06U
Before configuring the machine for scanning to e-mail, check the setup flow shown below.
Make sure that the machine and the computer are correctly connected.
Make sure that you have the following information:
●
The IP address of the machine. Viewing Network Settings(P. 344)
●
An e-mail address to be registered as a destination.
●
Information about the e-mail server, including the SMTP server name, port
numbers, whether authentication is required, and the user name and password
for authentication.
numbers, whether authentication is required, and the user name and password
for authentication.
●
For more information about the e-mail server settings, contact your Internet
service provider or Network Administrator.
service provider or Network Administrator.
Make sure that the computer meets the following system requirements for the
Send Setting Tool(sending e-mail):
Send Setting Tool(sending e-mail):
●
Operating system
Windows Vista/7/8/10/Server 2008/Server 2012
Windows Vista/7/8/10/Server 2008/Server 2012
●
Web browser
Microsoft Internet Explorer 7.0 or later
Microsoft Internet Explorer 7.0 or later
●
Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at
least 256 colors
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at
least 256 colors
●
Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Set the machine configuration.
●
●
Configuring E-Mail Receiving Settings Configuring E-Mail Communication
Settings(P. 363)
Settings(P. 363)
●
Configuring Detailed E-Mail Communication Settings (Authentication, Encryption,
etc.) Configuring E-Mail Communication Settings(P. 363)
etc.) Configuring E-Mail Communication Settings(P. 363)
Network
358