Canon VB-M641V Manuel

154

Note

The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality.

Using Presets or the Home Position

You can use a registered preset or home position to specify the range for Digital PTZ.

Select a preset from the preset selection menu (P. 142) to move the preview frame on the Digital PTZ panel to the 

preset position and display the video inside the frame in the video display area.

Click the [Home Position] button to move the preview frame on the Digital PTZ panel to the home position and display 

the video inside the frame in the video display area.

Note

Register presets and the home position beforehand in [Control for Admin] (P. 170).

Exiting Digital PTZ

When you click the [Digital PTZ] button while using the Viewer PTZ, the Digital PTZ panel closes and you exit Digital 

PTZ.

Note

• If you close the Digital PTZ panel without exiting Digital PTZ, Digital PTZ continues to operate. However, when you reconnect to 

the Admin Viewer, the initial state will be restored.

• The [Digital PTZ] button display will change as follows depending on whether or not you are using Digital PTZ.

 You are not using Digital PTZ (video being received by the camera appears in the video display area)

 You are using Digital PTZ (cropped video appears in the video display area)

Using Presets or the Home Position

It is possible to control the camera using a preset or home position registered to the camera in advance.

When you click the preset selection menu and select a preset from the list that appears, the camera will move to the camera 

angle of the selected preset.

Clicking the [Home Position] button will move the camera angle to the home position.

Preview Frame