Canon Wireless File Transmitter WFT-E8A Manuel
91
Using the Transmitter with WFT Server
1
Set up the slave cameras.
Perform steps 1 to 6 on page 84 for
the cameras to use as slaves. When
the next screen is displayed, the
slave cameras are ready.
the cameras to use as slaves. When
the next screen is displayed, the
slave cameras are ready.
2
Set up the master camera.
Perform steps 1 to 5 on page 84 for
the camera to use as the master, then
select [Master].
the camera to use as the master, then
select [Master].
Select [OK] and press <0> to go to
the next screen.
the next screen.
3
Select [Manual connect].
Select [OK] and press <0> to go to
the next screen.
the next screen.
4
Select connection method.
Select the wireless LAN ad hoc mode
supported by the computer.
supported by the computer.
Select [OK] and press <0> to go to
the next screen.
the next screen.
5
Specify the channel.
When selecting [Manual setting],
specify the same channel on the
master camera, slave cameras, and
computer.
specify the same channel on the
master camera, slave cameras, and
computer.
Select [OK] and press <0> to go to
the next screen.
the next screen.
Connecting the Master and Slave Cameras