Canon TX-20 Full Auto Tonometer Manuel
5TypesofMeasurements
53
Basic Operations on the PATIENT ID Screen
This section explains the basic procedures for the patient ID settings.
Steps 2 to 4: Input text.
Steps 5 to 6: Delete text.
Steps 7 to 8: Add text to existing text.
Step 9:
Steps 5 to 6: Delete text.
Steps 7 to 8: Add text to existing text.
Step 9:
Delete the entire ID.
1
Display the
PATIENT ID screen.
Press the ID key.
The ID cursor is at the end of the patient ID on the right.
The selection cursor is at the top of the list of characters.
The ID cursor is at the end of the patient ID on the right.
The selection cursor is at the top of the list of characters.
ID cursor
Selection
cursor
2
Decide on the position to input text.
Move the ID cursor to the right of where you want to input a character.
The procedure in steps 2 to 4 is explained using an example of inputting a “C” at the end of patient ID
“12”.
In this example, the cursor is already to the right of the “2”, so there is no operation.
“12”.
In this example, the cursor is already to the right of the “2”, so there is no operation.
Toaddtexttothefront
Move the ID cursor to the first character.
Move the ID cursor to the first character.
L-IE-5191C_TX-20.indb 53
2013/07/18 13:10:32