Canon PowerShot ELPH 180 Silver Manuel
176
ç
Contents
ç
Chapter Contents
Still Images
Movies
Using an Eye-Fi/FlashAir Card
Before using an Eye-Fi/FlashAir card, always confirm that local
use is permitted.
You can send images from the camera to Wi-Fi compatible
smartphones, tablets, or computers by inserting a FlashAir card in
the camera. Inserting a prepared Eye-Fi card enables automatic
wireless transfer of images to a computer or uploading to a
photo-sharing website.
Images are transferred by the Eye-Fi/FlashAir card. Refer to the
card’s user manual or contact the manufacturer for instructions on
preparing and using cards or resolving transfer problems.
•
When using an Eye-Fi/FlashAir card, keep the following
points in mind.
-
Cards may continue to emit radio waves even after
[FlashAir] is set to [Off] (
to [Disable] (
). Remove the card before entering
hospitals, aircraft, or other areas where transmission is
prohibited.
-
When troubleshooting image transfer issues, check
the card and computer settings. For details, refer to the
card’s user manual.
-
Poor network connections may delay or interrupt image
transfer.
-
Cards may become hot, due to their transfer functions.
-
Battery power will be consumed faster than in normal use.
-
Camera operation may become sluggish. To resolve this,
try setting [Eye-Fi trans.] to [Disable].