Canon HJ14ex4.3B Series Manuel
9
Fr1P
[ Basic ]
Fr1P
[ Basic ]
Fr1P
[ Basic ]
or
Using Digital Functions
Zoom Track Function
The zoom control range (zoom track) can be limited to preferred zoom
range.
range.
Setting
OFF
ON
Function
Disabled
Enabled
Default
flashing
Enable/Disable the zoom track function
Setting the zoom track positions
1
Zoom to any preferred zoom position and keep that position.
2
Press the Instant auto-iris switch while pressing down the MEMO switch. If the zoom
position is at the Telephoto side, the position is memorized as the zoom track Telephoto
end. If position is at the Wide side, it is memorized as the Wide end.
position is at the Telephoto side, the position is memorized as the zoom track Telephoto
end. If position is at the Wide side, it is memorized as the Wide end.
3
Repeat steps and to set both Telephoto and Wide ends. It is possible to set only one
end. If the zoom track position is set repeatedly at the same end, the last set position will
be memorized.
end. If the zoom track position is set repeatedly at the same end, the last set position will
be memorized.
to select OFF or ON
Top screen