Canon CINE-SERVO 50-1000mm T5.0-8.9 EF Manuel
E86
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Remote:
50
Auto:
90
[ ]
[ I-Gain ]
Iris
Remote:
50
Auto:
80
[ ]
[ I-Gain ]
MENU
MENU
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
[I-Tq]H
[Adj]
[ ] 1
A
Fr1P
[ Basic ]
[Trk]OFF
[I-Tq]H
[I-Tq]H
Specifying Remote Iris Gain
Although this value is factory-set, it can be adjusted as needed.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Options
01
to
99
Description
Minimum gain
Maximum gain
Default value: 90
MENU
× 2
[I-Gain]
× 2
or
Note: Do the following when
adjusting gain while checking
iris operation.
iris operation.
→ Confi rm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Remote].
Note: The current iris gain value
is retained even if you reset
other settings as described in
“4.2.1 Resetting Values.” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
other settings as described in
“4.2.1 Resetting Values.” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
1
2
3
4
5
Press
twice.
Your selection is now highlighted.
Press
.
The display switches to the [I-Gain] screen.
Press
twice.
[Remote] is underlined.
The previous or default value is highlighted.
Press
or
.
Press left or right until you reach the desired value.
Press
.
The display reverts to Screen A.
Initial Top Screen
Screen A
[I-Gain] Screen