Canon EOS-1D X Mark II Manuel

6



In this manual, the term “access point” indicates wireless LAN access 
points, wireless LAN routers, etc. that relay a LAN connection.



These instructions should be followed only after setting up your LAN 
and FTP server environments. For information about setting up the 
environments, refer to the documentation provided with each device 
or contact the manufacturer.



Read the Camera Instruction Manual and familiarize yourself with 
operating the camera before following the instructions on camera 
options.

<6> : Indicates the Main Dial.
<5> : Indicates the Quick Control Dial.
<9> : Indicates the Multi-controller.
<0> : Indicates the Setting button.

* In addition to the above, the icons and symbols used on the camera’s buttons 

and displayed on the LCD monitor are also used in this manual when discussing 
relevant operations and functionality.

(p.**) : Reference page numbers for more information.

 : Warnings to prevent potential problems during operation.
 : Supplemental information.



All operations explained in this manual assume that the power 
switch is set to <1>.



It is assumed that all the menu settings, Custom Functions, etc. are 
set to their defaults.



Image transfer, remote shooting, or viewing images requires adequate 
knowledge of configuring your wired LAN and FTP server. Canon cannot 
provide support for configuring wired LANs or FTP servers.



Note that Canon cannot be held liable for any loss or damage to the 
camera from erroneous network or FTP server settings. In addition, Canon 
cannot be held liable for any other loss or damage caused by use of the 
camera.



When using wired LAN functions, establish appropriate security at your 
own risk and discretion. Canon cannot be held liable for any loss or 
damage caused by unauthorized access or other security breaches.