Canon EOS-1D X Mark II Manuel
88
If a wired LAN error is displayed on the camera’s LCD monitor, refer to
the examples of corrective actions in this section to eliminate the cause
of the error. In case of errors, the <Y> lamp on the camera blinks in
red. The error details can also be checked under the [53] tab
[Communication settings] 9 [Network settings] 9 [Error
description].
the examples of corrective actions in this section to eliminate the cause
of the error. In case of errors, the <Y> lamp on the camera blinks in
red. The error details can also be checked under the [53] tab
[Communication settings] 9 [Network settings] 9 [Error
description].
If [Waiting to retry transfer...] is displayed
If image transfer via FTP fails after
shooting, the screen on the left is
displayed, and the camera’s <Y>
lamp blinks in red. Check the error code
number and eliminate the cause of the
error.
Once the cause of the error is
eliminated, the images whose transfer
previously failed will be re-transferred
automatically.
Note that when you cancel image
transfer, or turn off the camera, the
image will not be re-transferred
automatically. See page 32 and transfer
the image.
shooting, the screen on the left is
displayed, and the camera’s <Y>
lamp blinks in red. Check the error code
number and eliminate the cause of the
error.
Once the cause of the error is
eliminated, the images whose transfer
previously failed will be re-transferred
automatically.
Note that when you cancel image
transfer, or turn off the camera, the
image will not be re-transferred
automatically. See page 32 and transfer
the image.
Responding to Error Messages
11 (p.89)
12 (p.89)
21 (p.89)
22 (p.91)
23 (p.92)
41 (p.94)
42 (p.96)
43 (p.96)
46 (p.98)
47 (p.98)