Canon EOS-1D X Mark II Manuel

22

This section describes the process following the connection 
instructions. If an error is displayed, see “Troubleshooting Guide” in 
Chapter 10 (p.117) and check the settings.



Pressing the shutter button or other camera controls during 
configuration using the connection instructions will close the 
connection instructions. Do not press the shutter button or other 
controls until configuration is finished.



Under the [52] tab, set [Auto power off] to [Disable]. If auto power 
off is activated, the connection instructions will be closed during the 
configuration process.



Under the [53] tab, select 
[Communication settings], then 
press <0>.



Set [Communication func] to 
[Enable], then select [Network 
settings].