Olympus LS-7 Manuel De Présentation

•  Manganese batteries may not be used in 

this recorder.

•  When changing batteries, AAA alkaline 

batteries or Olympus Ni-MH rechargeable 
batteries are recommended.

•  Be sure to stop the recorder before 

replacing the batteries. Unloading the 
batteries while the recorder is in use may 
cause a malfunction such as corrupting 
the file, etc. If you take out the batteries 
while recording, you will lose your 
currently recorded file because the file 
header will not be able to close.

•  If it takes longer than 15 minutes to 

replace the dead batteries or if you take 
the batteries in and out repeatedly at 
short intervals, you may have to redo the 
battery and time settings. In this case, the 
[Battery] screen will appear. For more 
details, see “Battery settings”.

•  Remove the batteries if you are not going 

to use the recorder for an extended 
period of time.

•  When replacing rechargeable batteries, 

be sure to use Ni-MH rechargeable 
batteries (optional). The use of other 
manufacturers’ products can damage the 
recorder and should be avoided.

• When 

[

æ] appears on the display, 

replace the batteries as soon as 
possible. When the batteries are 
too weak, [

s] and [Battery Low] 

will appear on the display and the 
recorder will shut down.

Select to match the battery you are using.

☞ P.15).

[Ni-MH] (

õ): 

Select when using the Olympus 
Ni-MH rechargeable batteries 
(BR404).

[Alkaline] (

ú): 

Select when using alkaline batteries.

`OK button to 

•  If the “Hour” indicator flashes in the 

display, see “Setting time and date 
[Time & Date]” (

☞ P.22).

The battery indicator on the display 
changes as the batteries lose power.

Battery type