Olympus LS-7 Manuel De Présentation

d

a

b

c

e

☞ P.27).

s) button to 

•  The recording indicator light will flash 

and [

≠] will appear on the display.

•  Turn the microphone in the direction 

of the source to be recorded.

•  This recorder is designed to be able 

to record cleanly and evenly, even in 
recording conditions such as when 
the volume of the source sound 
changes significantly. However, even 
higher sound quality recordings 
can be achieved by adjusting the 
recording level manually (

☞ P.51).

s) button to start 

•  The recording indicator light grows 

and [

K] will appear on the display.

e Elapsed recording time
• [Rec Mode] cannot be changed in 

the recording standby mode or while 
recording. Configure this while the 
recorder is stopped (

☞ P.51).

•  Placing the built-in stereo 

microphone over the display is the 
proper position for performing stereo 
recording. If it is below the display 
when recording then proper stereo 
recording cannot be performed 
because the position of the original 
sound will be recorded in reverse 
phase.

Before starting recording, select a folder 
among [

&] to [*]. These five folders can be 

selectively used to distinguish the kind of 
recording; for example, Folder [

&] might 

be used to store private information, while 
Folder [

'] might be dedicated to holding 

business information.

4) button

s) button

a Recording mode

b Remaining recording time

c Remaining memory bar indicator

d Level meter (changes according to 

the recording level and recording 
function settings)