Olympus LS-7 Manuel De Présentation

The batteries are not loaded properly.

Verify that the batteries’ polarities 

= 

and 

- are correct (☞ P.15).

Battery power is getting low.

Charge the batteries or replace with 
new batteries (

☞ P.15, P.17).

The power is off.

Turn the power on (

☞ P.20).

Battery power is getting low.

Charge the batteries or replace with 
new batteries (

☞ P.15, P.17).

The power is off.

Turn the power on (

☞ P.20).

The recorder is in HOLD mode.

Release the recorder from HOLD 
(

☞ P.21).

Low remaining memory.

Erase unnecessary files (

☞ P.45).

The maximum number of files has 
been reached.

Change to any other folder
(

☞ P.27 to P.29).

An external microphone supported by 
plug-in power is connected but [Plug-
in Power] is set to [Off].

Set [Plug-inPower] to [On] when an 
external microphone supported by 
plug-in power is connected (

☞ P.56).

The earphone is connected.

Unplug the earphones to use the 
internal speaker.

The volume level is set to [00]. 

Adjust the volume level (

☞ P.37).

The recording level has not been 
adjusted.

Adjust the recording level and then try 
recording once more (

☞ P.51).

The microphone sensitivity is too low.

Set [Mic Sense] to [High] or [Middle] 
(

☞ P.50).

This could potentially be because 
the output level for the connected 
external devices are too low. 

Adjust the output level for the
connected devices.

The recording level has not been 
adjusted.

Adjust the recording level and then try 
recording once more (

☞ P.51).

This could potentially be because 
the recording level and output level 
for connected external devices are 
too high.

If you cannot record clearly even 
after adjusting the recording level, 
then adjust the output level for the 
connected devices (

☞ P.51).