Olympus PT-057 Manuel D'Instructions

Page de 32
EN 5
EN
6 Jumping into the water with the Case in your pocket or in your hand, 
throwing the Case from a boat or ship into the water, and other rough 
handling may cause water leakage. Please handle with sufficient care, 
when handing it over from hand to hand etc.
7 If the Case interior or the camera should become wet because of water 
leakage, etc., immediately wipe off all moisture and contact your local 
service station or dealer.
8 Please remove the O-ring when traveling by air. Otherwise air 
pressure may make it impossible to open the Case.
9 For safe use of the digital camera in this product, please read the 
“Instruction Manual” for the digital camera carefully.
0 When sealing this product, take sufficient care that no foreign matter 
gets caught at the O-ring and the contact surface. It is caused for water 
leakage.
a When you install your digital camera in the Case after taking pictures 
in the water, it may cause the loss of transparency of the lens inside 
even if you insert the supplied silica gel to the Case when drying the 
camera is insufficient.
Chemicals which cannot 
be used
Explanation
Volatile organic solvents,
chemical detergents
Do not clean the Case with alcohol, gasoline, 
thinner or other volatile organic solvents or with 
chemical detergents etc. Use pure water or 
lukewarm water.
Anticorrosion agent
Do not use anticorrosion agents. The metal parts 
use stainless steel or brass. Wash with pure 
water.
Commercial defogging 
agents
Do not use commercial defogging agents. Always 
use the specified desiccant silica gel.
Grease other than 
specified silicone grease
Use only the specified silicone grease for the 
silicone O-ring, as otherwise the O-ring surface 
may deteriorate and water leakage may occur. 
Adhesive
Do not use adhesive for repairs or other purposes. 
When repair is required, please contact a dealer or 
a service station of OLYMPUS IMAGING CORP. 
PT-057_EN.book  Page 5  Friday, November 21, 2014  10:13 AM