Olympus TG-860 Manuel De Présentation

EN

If the camera does not work as intended, or if an error message is displayed on 
the screen, and you are unsure of what to do, refer to the information below to fix 
the problem(s).

 





Battery

•  Insert recharged batteries in the correct direction. 

g “Inserting and 

removing the battery and card” (P. 5)

•  Battery performance may have been reduced temporarily due to low 

temperature. Take the batteries out of the camera, and warm them by putting 
them in your pocket for a while.

 



Card

• 

g “Error message” (P. 91)

 



Shutter button

•  Cancel sleep mode.

To save battery power, the camera automatically goes into sleep mode and 
the monitor turns off if there is no operation for 3 minutes when the camera 
is turned on. No picture is taken even if the shutter button is fully pressed in 
this mode. Operate the zoom lever or other buttons to restore the camera 
from sleep mode before taking a picture. If the camera is left for another 
12 minutes, it automatically turns off. Press the n button to turn the 
camera on.

• Press the 

q button to switch to the shooting mode.

• Wait until 

#(flash charge) stops blinking before taking pictures.

•  With prolonged camera use, the internal temperature may increase, resulting 

in automatic shutdown. If this occurs, wait until the camera has sufficiently 
cooled. 
The camera’s external temperature may also increase during use, however 
this is normal and does not indicate malfunction.