Netgear M4100-24G-POE+ (GSM7224P) - ProSAFE Gigabit L2+ Managed Switch Manuel De L’Administrateur
SNMP
293
ProSAFE M4100 Managed Switches
Add a New Community
The example is shown as CLI commands and as a Web interface procedure.
CLI: Add a New Community
(Netgear switch) #config
(Netgear switch) (Config)#snmp-server community rw public@4
Web Interface: Add a New Community
1.
Select System > SNMP > SNMP V1/V2 > Community Configuration. A screen similar
to the following displays.
to the following displays.
2.
In the Community Name field, enter public@4.
3.
In the Client Address field, enter 0.0.0.0.
4.
In the Client IP Mask field, enter 0.0.0.0.
5.
In the Access Mode field, select Read/Write.
6.
In the Status field, select Enable.
7.
Click Add.