Netgear Business Central Wireless Manager (BCWM) Guide D’Installation Rapide
Your settings are saved. In the Locations tree on the left, the WiFi network displays under the Wireless
Networks heading for the location.
Networks heading for the location.
Add a First Access Point to a Location
When you add a location (see
on page 18), the application automatically adds a
Devices heading for the location in the Locations tree on the Configuration page, but you must add at least
one access point that can carry the WiFi networks that you configure at the location.
one access point that can carry the WiFi networks that you configure at the location.
CAUTION:
If you add an access point to a location but do not add a WiFi network to the location,
the access point continues to broadcast its default SSIDs and provides open networks
without any security. Make sure that you add a WiFi network to the location (see
the access point continues to broadcast its default SSIDs and provides open networks
without any security. Make sure that you add a WiFi network to the location (see
on page 20) so that you can control WiFi security.
To add a first access point to a location:
1.
Open a browser on your computer.
2.
In the address bar, enter https://bc.netgear.com.
The application login page displays.
3.
Enter the email address and password for your BCWM and click the Login button.
The Monitoring page displays.
4.
Select Configuration.
The Configuration page displays and shows the location that you added (see
on page 18).
5.
In the Locations tree, click Devices.
The page displays the following message: There are no devices configured for this location.
Prepare Your Access Points, Subscribe, and Get Started
23
Business Central Wireless Manager 2.1 Application