Netgear FWG114Pv1 – Wireless Firewall with USB Print Server Guide D’Exploitation

4-8

Wireless Configuration

Take the following steps:

For a new wireless network, print or copy this form and fill in the configuration parameters. For an 
existing wireless network, the person who set up or is responsible for the network will be able to 
provide this information. Be sure to set the Regulatory Domain correctly as the first step.

•

SSID: The Service Set Identification (SSID) identifies the wireless local area network. 
Wireless is the default FWG114P SSID. However, you may customize it by using up to 32 
alphanumeric characters. Write your customized SSID on the line below. 

Note: The SSID in the wireless firewall/print server is the SSID you configure in the wireless 
adapter card. All wireless nodes in the same network must be configured with the same SSID: 

Circle one: Open System or Shared Key. Choose “Shared Key” for more security.

Note: If you select shared key, the other devices in the network will not connect unless they 
are set to Shared Key as well and have the same keys in the same positions as those in the 
FWG114P.

For all four 802.11b keys, choose the Key Size. Circle one: 64 or 128 bits

Key 1: ___________________________________ 

Key 2: ___________________________________ 

Key 3: ___________________________________ 

Key 4: ___________________________________ 

Record the WPA-PSK key:

Key: ___________________________________ 

For WPA, record the following RADIUS settings:

Server Name/IP Address: Primary _________________ Secondary __________________ 

Port: ___________________________________ 

Shared Key: ___________________________________ 

Use the procedures described in the following sections to configure the FWG114P. Store this 
information in a safe place.