Netgear FWG114Pv1 – Wireless Firewall with USB Print Server Guide D’Exploitation

Print Server

7-5

Follow these instructions to set up the Netgear Printer Port Drive on Windows 9x PCs.

a.

Follow the instructions in the printed 
Installation Guide or this manual to 
install your FWG114P.

b.

Connect your printer to the USB port on 
the back of the FWG114P.

c.

Insert the Resource CD for the 
FWG114P into the CD-ROM drive of a 
computer connected to the FWG114P. 

 

 
The CD main page shown at the right 
will load.

d.

Click the Print Server button. 

 

 
Follow the instructions for running the 
setup utility.

 

 

 

 

e.

Click Next to proceed through the 
Netgear Printer Port Installation Wizard 
steps. 

Note: Windows 2000 or XP may require 
you to be logged on with administrator 
rights.

Warning: If you are installing the Netgear 
printer port driver on a Windows computer 
where an Epson printer had been installed, 
you must disable the Epson Spool 
Manager. Failure to disable Epson Spool 
Manager software will prevent the Netgear 
printer port driver from operating.

To disable the Epson Spool Manager, run the 
Epson Spool Manager, select Queue Setup 
from the menu, click Use Print Manager 
for this port, and click OK to exit.

Netgear Printer Port Installation Wizard