Juniper CBL-PWR-10AC-STR-UK Manuel D’Utilisation
M7i Chassis Description
The router chassis is a rigid sheet metal structure that houses the other hardware
components. The chassis is 17.5 in. (44.5 cm) wide and 18 in. (45.7 cm) deep. The chassis
height of 3.5 in. (8.9 cm) enables stacked installation of 21 M7i routers in a single
floor-to-ceiling rack. For more information, see
components. The chassis is 17.5 in. (44.5 cm) wide and 18 in. (45.7 cm) deep. The chassis
height of 3.5 in. (8.9 cm) enables stacked installation of 21 M7i routers in a single
floor-to-ceiling rack. For more information, see
The two mounting brackets (one on each side) extend the chassis width to 19 in.
(48.2 cm).
(48.2 cm).
Figure 1: Front of Chassis
Figure 2: Rear of Chassis
The chassis includes the following electrical safety components:
•
One electrostatic discharge (ESD) points (banana plug receptacles), at the front of
the chassis, as shown in
the chassis, as shown in
.
•
Two internally threaded inserts providing grounding points for the router.
WARNING:
Before removing or installing components of a functioning router,
attach an ESD strap to an ESD point and place the other end of the strap
Copyright © 2012, Juniper Networks, Inc.
6
M7i Multiservice Edge Router Hardware Guide