Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch Manuel D’Utilisation
Ports 1/0/1 - 1/0/5
Connected to Hosts
Connected to Hosts
Ports 1/0/1 - 1/0/5
Connected to Hosts
Connected to Hosts
Ports 1/0/1 - 1/0/5
Connected to Hosts
Connected to Hosts
Ports 1/0/6 - 1/0/8
Connected to Switch 2 and 3
Connected to Switch 2 and 3
Ports 1/0/6 - 1/0/8
Connected to Switch 1 and 3
Connected to Switch 1 and 3
1/0/1 - 1/0/5 Switch 1
Root Bridge
Root Bridge
Switch 2
Switch 3
Ports 1/0/6 - 1/0/8
Connected to
Switch 2 and
Connected to
Switch 2 and
622
|
Appendix B. Configuration Examples
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Perform the following procedures on each switch to configure MSTP:
1.
Use the VLAN Configuration screen to create VLANs 300 and 500 (see
2.
Use the VLAN Membership screen to include ports 1/0/1 - 1/0/8 as tagged (T) or untagged
(U) members of VLAN 300 and VLAN 500 (see
(U) members of VLAN 300 and VLAN 500 (see
).
3.
).
Use the default values for the rest of the STP configuration settings. By default, the STP
Operation Mode is MSTP and the Configuration Name is the switch MAC address.
Operation Mode is MSTP and the Configuration Name is the switch MAC address.
4.
From the CST Configuration screen, set the Bridge Priority value for each of the three
switches to force Switch 1 to be the root bridge:
switches to force Switch 1 to be the root bridge:
•
Switch 1: 4096
•
Switch 2: 12288
•
Switch 3: 20480
Note:
Bridge priority values are multiples of 4096.
If you do not specify a root bridge and all switches have the same Bridge Priority value,
the switch with the lowest MAC address is elected as the root bridge (see
the switch with the lowest MAC address is elected as the root bridge (see
).
5.
From the CST Port Configuration screen, select ports 1/0/1 - 1/0/8 and select Enable from
the STP Status menu (see
the STP Status menu (see
6.
Click Apply.