Netgear M4100-12G-POE+ (GSM7212P) - 12-Port Managed Gigabit Switch Manuel D’Utilisation

Select Switching









 Protocol Based VLAN Group Configuration. 

Use Group Name to assign a name to a new group. 

You can enter up to 16 characters.

Use Protocol(s) to select the protocols to be associated with the group. 

There are three configurable protocols: IP, IPX, ARP.

IP. IP is a network layer protocol that provides a connectionless service for the 
delivery of data.

ARP. Address Resolution Protocol (ARP) is a low-level protocol that dynamically 

maps network layer addresses to physical medium access control (MAC) addresses.

IPX. The Internetwork Packet Exchange (IPX) is a connectionless datagram 
network-layer protocol that forwards data over a network.

Use VLAN ID to select the VLAN ID. 

It can be any number in the range of 1 to 4093. All the ports in the group assign this VLAN 
ID to untagged packets received for the protocols you included in this group.

To add a new protocol-based VLAN group to the switch, click the ADD button.

To remove the protocol-based VLAN group identified by the value in the Group ID field, click 
the DELETE button.

The following table describes the nonconfigurable information displayed on the screen.

Group ID

A number used to identify the group created by the user. Group IDs are 

automatically assigned when a group is created by the user.

Ports

Display all the member ports that belong to the group.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.