Netgear M4100-12G-POE+ (GSM7212P) - 12-Port Managed Gigabit Switch Manuel D’Utilisation

You can use a location up to 255 characters in length. The factory default is blank.

Enter the System Contact, the name of the contact person for this switch.

You can use a contact name up to 255 characters in length. The factory default is blank.

In the SNTP Mode menu, select Enable or Disable.

This specifies the state of the SNTP client. The default value is Enable, and the local 
clock is used to get the time value.

Specify the address of the SNTP server. 

Enter a text string of up to 64 characters containing the host name of an SNTP server. 
The server address can be IPv4, IPv6, or a host name. The host name resolves into an IP 
address each time an SNTP request is sent to it.

Select a Designated Source Interface from the list.

Possible values are Management VLAN or Service Port. The source interface to be used 
for SNMP trap, syslog, DNS, TACACS+, RADIUS, sflow and SNTP applications. By 
default, Management VLAN is used as the source interface. 

If you configure a management VLAN as the source interface, you 
must enable routing mode for the selected VLAN.

Click the APPLY button.

The settings are sent to the switch. Configuration changes take effect immediately. These 
changes are not retained across a power cycle unless you save the configuration. See 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button.