Netgear M4100-12G-POE+ (GSM7212P) - 12-Port Managed Gigabit Switch Manuel De L’Administrateur
Security Management
224
ProSAFE M4100 Managed Switches
3.
Configure a RADIUS authentication server.
(Netgear Switch) (Config)#radius server host auth 10.100.5.17
4.
Configure the shared secret between the RADIUS client and the server.
Netgear Switch) (Config)#radius server key auth 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
5.
Set the RADIUS server as a primary server.
(Netgear Switch) (Config)#radius server msgauth 10.100.5.17
(Netgear Switch) (Config)# radius server primary 10.100.5.17
6.
Configure an accounting server.
(Netgear Switch) (Config)#radius accounting mode
(Netgear Switch) (Config)#radius server host acct 10.100.5.17
7.
Configure the shared secret between the accounting server and the client.
(Netgear Switch) (Config)#radius server key acct 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
Web Interface: Authenticating dot1x Users by a RADIUS Server
1.
Enable routing for the switch.
a. Select Routing > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.