Netgear JR6150 - AC750 WiFi Router - 802.11ac Dual Band Gigabit Manuel D’Utilisation

Page de 159
genie ADVANCED Home
45
 A750 Wireless Dual Band Gigabit Router JR6150
Forwarding/Port Triggering screen. Instead of discarding this traffic, you can forward it to one 
computer on your network. This computer is called the default DMZ server.
To set up a default DMZ server: 
1.
Log in to the router.
2.
Select ADVANCED > Setup > WAN Setup.
3.
Select the Default DMZ Server check box.
4.
Type the IP address.
5.
Click Apply.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits. 
When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If any device in the data path has a lower MTU 
setting than the other devices, the data packets must be split or “fragmented” to 
accommodate the device with the smallest MTU. 
The best MTU setting for NETGEAR equipment is often just the default value, and changing 
the value might fix one problem but cause another. Leave the MTU unchanged unless one of 
these situations occurs:
You have problems connecting to your ISP or other Internet service, and the technical 
support of either the ISP or NETGEAR recommends changing the MTU setting. These 
web-based applications might require an MTU change:
-
A secure website that does not open, or displays only part of a web page
-
Yahoo email
-
MSN portal
-
America Online’s DSL service