Netgear XAUB2511 - Powerline Music Extender Manuel D’Utilisation

Set Up the Powerline Network

You can set up a new Powerline network that includes the Music Extender, or you can add the 
Music Extender to an existing Powerline network. 

Set Up a New Powerline Network

Different Powerline product models can share the network. All NETGEAR Powerline 
HomePlug AV products are compatible with the Powerline Music Extender XAU2511.



Make sure that your WiFi router or gateway is connected to the Internet and that your 

Ethernet wired connections are working. 
a. On a computer that is connected to your router or gateway using an Ethernet cable, 

open a web browser and navigate to a web page.

b.  On a computer or device that is connected to your wireless network, open a web 

browser and navigate to a web page.

Plug the first Powerline device (sold 

separately) into a wall outlet near your router 

or gateway. Then, connect the device to the 

LAN port on your router or gateway using an 

Ethernet cable.

For more detailed instructions, see the 
installation guide that came in the package.

Plug the Music Extender into a wall outlet 

near the USB devices that you want to 

connect to the Music Extender.

Wait for each Powerline adapter or extender 

to be recognized by the Powerline network. 

The Power and Powerline LEDs should 
turn on. This could take as little as 5 
seconds, or up to 80 seconds. If the 
Powerline LEDs are green or amber, the 
devices are successfully connected. A red 
LED indicates a poor link rate. In this case, 
move the device to another electrical outlet 
with a better connection.