Netgear XAUB2511 - Powerline Music Extender Manuel D’Utilisation

LED and Feature Descriptions

Power LED

•  Solid green. The electrical power is on.
•  Blinking green. The device is in the process of restarting or establishing security.
•  Off. There is no electrical power.

Powerline LED

•  Solid. The device is connected to a Powerline network.
• Off. The device has not found any other compatible Powerline devices using the same 

encryption key.

The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate, 
indicated by the color of the Powerline LED:

Green. Link rate > 80 Mbps 
(Good)

Amber. Link rate > 50 and 
< 80 Mbps (Fair)

Red. Link rate < 50 Mbps 
(Poor)

Ethernet LED

•  Solid green. The device has an active Ethernet connection.
•  Off. There is no Ethernet connection.

Factory Reset. Press the Factory Reset button on the side of the Music Extender for 

1 second, and then release it to return the Music Extender to its factory default 
settings.

Security. If you set security on your other Powerline devices, after you plug your new 
Music Extender into the wall socket, press its Security button for 2 seconds. Then, 
press the Security button on any Powerline device in your existing network for 2 
seconds. Both buttons must be pressed within 2 minutes. 

On/Off. Use the On/Off switch to turn the device on and off. When this switch is in the 

Off position, the filtered AC socket still has power.