Netgear D6400 – AC1600 WiFi VDSL/ADSL Modem Router—802.11ac Dual Band Gigabit Manuel D’Utilisation

Specify a new outbound rule as described in the following table.

Protocol

Select the protocol (TCP or UDP) that is associated with the service or 
application. If you are unsure, select TCP/UDP.

Starting Port

Enter the start port for the service or application.

Ending Port

If the service or application uses a range of ports, enter the end port for the 
range. If the service or application uses a single port, repeat the port number 
that you entered in the Starting Port field.

Service Type/User Defined Enter the name of the custom service or application.

Specify which devices on your LAN (or LAN users) are affected by the rule, based on their 

IP addresses:

Only This IP Address. Enter the required address in the fields to apply the rule to a 
single device on your LAN.

IP Address Range. Enter the required addresses in the start and end fields to apply 
the rule to a range of devices.

All IP Addresses. All computers and devices on your LAN are covered by this rule.

By default, the All IP Addresses radio button is selected.

Click the Add button.

The new rule is added to the Service Table on the Block Services page.

You can change an existing outbound firewall rule.



Launch a web browser from a computer or WiFi device that is connected to the network.

Type http://www.routerlogin.net.

A login window opens.

Enter the user name and password for the modem router.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

Click the OK button.

The BASIC Home page displays.

Select ADVANCED > Security > Block Services.

The following figure shows two rules in the Service Table.