Netgear D6400 – AC1600 WiFi VDSL/ADSL Modem Router—802.11ac Dual Band Gigabit Manuel D’Utilisation

c.  Enter the MAC address of the computer or router with which you previously were 

able to connect to the Internet.

You might find the MAC address on the product label of your device. Enter the 
MAC address in the AABBCCDDEEFF format, not in the AA:BB:CC:DD:EE:FF 
format.

d.  Click the Next button.

If the Congratulations! page still does not display and the modem router still does not 

connect to the Internet, do the following:
a. Review all your settings. 

Make sure that you selected the correct options and entered everything correctly.

b.  Run the Setup Wizard one more time.
c.  Contact your ISP to verify that you are using the correct configuration information.
d.  Read 

276. 

e.  If problems persist, register your NETGEAR product and contact NETGEAR 

technical support.

When the modem router connects to the Internet, you are prompted to download and install 
the free NETGEAR Desktop genie app and the free ReadySHARE Vault app.

After you set up the modem router for DSL, cable, or fiber service, you can view or change 

the settings for the modem router by accessing NETGEAR genie.



Launch a web browser from a computer or WiFi device that is connected to the network.

Type http://www.routerlogin.net.

You can also type http://www.routerlogin.com or http://192.168.0.1. 
The procedures in this manual use http://www.routerlogin.net.