Netgear EX6200 – AC1200 WiFi Range Extender – 802.11ac Dual Band Gigabit Manuel D’Utilisation
Extender Network Settings
35
AC1200 WiFi Range Extender
Use WPS with the Push Button Method
To use the Push Button method to connect a WiFi device to the extender’s WiFi network, the
WiFi device that you are trying to connect must have a physical push button or a software
push button.
WiFi device that you are trying to connect must have a physical push button or a software
push button.
To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1.
On a computer or WiFi device that is connected to the extender network, launch a web
browser.
browser.
2.
In the address field of your browser, enter www.mywifiext.net.
3.
When prompted, enter your user name and password.
4.
Click the Menu icon
.
The extender menu displays.
5.
Select Settings > Do More > Connect Devices (WPS).
6.
Leave the Push Button (recommended) radio button selected.
7.
Click the WIFI PROTECTED SETUP (WPS) button.
Both Link Rate LEDs
and the Device to Extender LED
blink green for two
minutes.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi
network.
network.
8.
Within two minutes, go to the computer WiFi device and press or click its WPS button.
9.
To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
Settings > Connected Devices.
The WiFi device displays onscreen.
Use WPS with the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.
know the PIN of the WiFi device that you are trying to connect.