Netgear EX6200 – AC1200 WiFi Range Extender – 802.11ac Dual Band Gigabit Manuel D’Utilisation
Share a USB Storage Device
55
AC1200 WiFi Range Extender
To map the USB device to a Windows network drive:
To map the USB device to a Windows network drive:
1.
Connect your USB storage device to the USB port on the router.
If your USB device uses a power supply, you must use it when you connect the USB
device to the router.
device to the router.
When you connect the USB device to the extender’s USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB drive is available to all
computers on your local area network (LAN).
minutes before it is ready for sharing. By default, the USB drive is available to all
computers on your local area network (LAN).
2.
Select Start > Run.
3.
Enter \\readyshare in the dialog box.
4.
Click the OK button.
A window automatically opens and displays the USB Storage device.
5.
Right-click the USB storage device and select Map network drive.
The Map Network Drive page displays:
6.
Select the drive letter to map to the network folder.
7.
Click the Finish button.
The USB device is mapped to the drive letter that you specified.
8.
To connect to the USB storage device as a different user, select the Connect using
different credentials check box, click the Finish button, and do the following:
different credentials check box, click the Finish button, and do the following:
a. Type the user name and password.
b. Click the OK button.
The USB storage device is mapped to the drive letter that you specified.
Turn the USB Port Off and On
By default the USB port is on, but you can log in to the extender and turn it off and on.
To turn the USB port off and on:
1.
On a computer or WiFi device that is connected to the extender network, launch a web
browser.
browser.
2.
In the address field of your browser, enter www.mywifiext.net.
3.
When prompted, enter your user name and password.
4.
Click the Menu icon
.
The extender menu displays.