Netgear EX6200 – AC1200 WiFi Range Extender – 802.11ac Dual Band Gigabit Manuel D’Utilisation
Overview
9
AC1200 WiFi Range Extender
Rear Panel Ports, Buttons, Antennas, and Connector
The following figure shows the ports, buttons, antennas, and connector on the rear panel of
the extender.
the extender.
Restore Factory Settings button
Ethernet LAN ports
Power connector
On/Off button
WPS button
Two preinstalled 5dBi antennas
Figure 3. Rear panel
Device to Extender
LED
LED
Green. The extender is connected to a computer or WiFi device.
Note:
If you press the WPS button on the rear panel of the extender, the LED
blinks green for two minutes.
Amber. The extender is starting or is applying WiFi settings. After about one
minute, the LED turns green.
During the startup process, both Link Rate LEDs also light amber. After about
one minute, these LED light green or turn off, depending on the WiFi
connection between the extender and the WiFi network.
one minute, these LED light green or turn off, depending on the WiFi
connection between the extender and the WiFi network.
Note:
The Device to Extender LED blinks amber during a firmware update.
Off. The extender is not connected to a computer or WiFi device.
USB LED
Solid green. A USB device is connected to the USB port.
Off. No USB device is connected to the USB port.
Table 1. Front panel LEDs
LED
Description