Xerox EC-PJM (also known as EOMS C-Services 2.0) Support & Software Mode D'Emploi
1. First define your EOMS printer, per the instructions in this document.
2. From the Windows taskbar, select Start, and select
Settings/Printers. The Printers dialog box appears.
3. Right Click on the Printer > Properties.
4. Select
the
Ports tab.
5. Click
on
Add Port.
6. Double click on EOMS Printer Port.
7. Select
-
Connect the following Printer:
8. From the drop down Menu select one of the previously defined
EOMS Printers (i.e.DT6180) and click Next.
9. Click
Close on the Printer Ports dialog.
10. You should see your defined Port (i.e. <your computer
name>:DT6180)
11. Click Close and select Done.
Upgrading a DocuSP printers from LPR to IPP
If you upgrade your DocuSP printer to IPP after you have defined your
printers in C-Services, you will need to remove the old printers and
reinstall them as IPP printers, following the instructions defined in this
document.
printers in C-Services, you will need to remove the old printers and
reinstall them as IPP printers, following the instructions defined in this
document.
If you wish to have more than one IPP output queue defined in C-
Services for each printer, you will need to have a matching IPP queue
defined on the DocuSP controller. This may require that you define
additional queues, by editing the Printer Discovery file (printer.disc) file on
the DocuSP controller. Refer to your DocuSP documentation for details.
Services for each printer, you will need to have a matching IPP queue
defined on the DocuSP controller. This may require that you define
additional queues, by editing the Printer Discovery file (printer.disc) file on
the DocuSP controller. Refer to your DocuSP documentation for details.
22
C-SERVICES UPDATE DOCUMENT