Xerox XCounter Page Accounting Support & Software Mode D'Emploi
Mar 2001
5/30/2001
XCOUNTER FOR NOVELL USER REFERENCE MANUAL
46
Banner Template File
XCounter may be configured to send a customized banner with the print job. Select
from the following banner templates:
from the following banner templates:
•
None: No banner printed
•
PCL4 (Letter): HP LaserJet Series II or equivalent - letter size paper
•
PCL5 (Letter): HP LaserJet III or equivalent - letter size paper
•
PCL5/PJL (Letter): HP LaserJet 4 or equivalent - letter size paper
•
Postscript (Letter): Any Postscript printer - letter size paper
•
PCL4 (A4): HP LaserJet Series II or equivalent - A4 size paper
•
PCL5 (A4): HP LaserJet III or equivalent - A4 size paper
•
PCL5/PJL (A4): HP LaserJet 4 or equivalent - A4 size paper
•
Postscript (A4): Any Postscript printer - A4 size paper
On printers that support PJL and multiple printer languages such as PCL and
PostScript, it is recommended that one of the PJL banners is used so that the printer
can effectively separate the banner print data from the rest of the print job.
PostScript, it is recommended that one of the PJL banners is used so that the printer
can effectively separate the banner print data from the rest of the print job.
Duplex Handling
XCounter has two options for handling duplex printing. If the printer driver is
configured for duplex printing, and a print job is sent to the printer, XCounter can
either account for all pages sent to the printer or divide the page count in half. The two
options are as follows:
configured for duplex printing, and a print job is sent to the printer, XCounter can
either account for all pages sent to the printer or divide the page count in half. The two
options are as follows:
•
Ignore- XCounter will leave the page count alone.
•
Divide page count in half- XCounter will check for duplex print jobs in the data
stream and divide the total page count by 2.
stream and divide the total page count by 2.
XCounter detects duplex printing from print data stream sent to the printer. If the
printer hardware is setup to print duplex by default, and a print job contains no
information about duplex data, then XCounter will not detect a duplex print job. The
printer hardware must be setup to print single-sided by default and allow users to
specify duplex options using printer drivers.
printer hardware is setup to print duplex by default, and a print job contains no
information about duplex data, then XCounter will not detect a duplex print job. The
printer hardware must be setup to print single-sided by default and allow users to
specify duplex options using printer drivers.