Xerox XCounter Page Accounting Support & Software Mode D'Emploi
XCOUNTER FOR NOVELL USER REFERENCE MANUAL
51
XCounter’s print job rules allows defined actions to be taken on prints jobs sent to
network-attacked printers. These print job rules are as follows:
network-attacked printers. These print job rules are as follows:
•
If byte size is greater than a specified amount, then an action can be
performed.
performed.
•
If byte size is less than a specified amount, then an action can be performed.
•
If page count is greater than a specified amount, then an action can be
performed.
performed.
•
If page count is less than a specified amount, then an action can be
performed.
performed.
Print Job Rule Actions
The following predefined actions can be associated the print job rules.
•
Delete job
•
Move job to end of queue - if smaller jobs are to be printed before larger jobs,
XCounter can move the larger jobs to the end. However, jobs will only be
moved once to the end of the queue.
XCounter can move the larger jobs to the end. However, jobs will only be
moved once to the end of the queue.
•
Move job to another printer.
Note: When jobs are moved to another printer, the following limitations apply:
•
If jobs are printing using the RAW data type, ensure that the printer drivers are
compatible.
compatible.
•
Watch that rules on multiple printers don’t result in jobs moving back and forth
between printers. Be certain that if a job is moved to another printer, that the
destination printer’s rules will allow it to print.
between printers. Be certain that if a job is moved to another printer, that the
destination printer’s rules will allow it to print.
•
Ensure that users have permission to print to the destination printer. If the user
does not have permission, then the job will not be moved.
does not have permission, then the job will not be moved.