Xerox Phaser 6360 Mode D'Emploi

Page de 128
Solving Print-Quality Problems
Phaser® 6360 Color Laser Printer
4-15
Print Area Is Not Centered on the Paper
Problem
The printed area appears outside the margins on the page.
Solution
1.
On the control panel, select 
Paper Tray Setup
, and then press the OK button.
2.
Select the tray you are using, and then press the OK button.
3.
Verify that the tray is set to the correct paper size.
4.
If the problem continues, use the Calibrate Margins page to shift the print area on the 
paper. The print area appears as a dashed rectangle on the Calibrate Margins page; the 
printer does not print outside this rectangle. 
a.
On the control panel, select 
Troubleshooting
, and then press the OK button.
b.
Select 
Print Quality Problems
, and then press the OK button.
c.
Select 
Calibrate Margins
, and then press the OK button.
d.
Select 
Calibrate Margins Page
, and then press the OK button.
e.
Select the appropriate tray to calibrate, and then press the OK button.
f.
Follow the instructions on the Calibrate Margins page.
Note:
The standard margins are 5 mm on all sides.