Xerox Phaser 5335 Guide De Montage

Installing and Configuring the PostScript Driver on Macintosh

27

Sets what action to take when the paper of the size you requested is not loaded in 
the printer.

Printer Default - Uses the settings configured on the printer.

Display Message - Displays a message on the control panel that prompts you to 
load the paper. Your document will not be printed until you load the paper in the

printer.

Use Closest Size (Reduce to Fit) - Uses the paper of the nearest size and prints

the document at 100% magnification or at a reduced magnification if necessary.

Use Closest Size (100%) - Uses the paper of the nearest size and prints the 
document at 100% magnification.

Use Larger Size (Reduce to Fit) - Uses the paper of a larger size and prints the 
document at 100% magnification or at a reduced magnification if necessary.

Use Larger Size (100%) - Uses the paper of a larger size and prints the document 
at 100% magnification.

Select Tray 1 (Bypass) - Feeds the paper from the Tray 1 (Bypass) when it is not 
loaded in the paper trays.

NOTE: On Macintosh OS X, [Substitute Tray] appears when [Feature Sets] is set to [Set 
1].

If printing on user-defined paper, enabling this feature corrects the orientation of the 
paper. If your document was printed 90 degrees rotated on the paper, select the 
check box.

NOTE: On Macintosh OS X, [Custom Paper Auto Orientation] appears when [Feature 
Sets] is set to [Set 2].

Sets whether or not to use the Image Enhancement feature. Enabling this feature 
artificially enhances resolution by smoothing out the edges of images. Images 
(bitmaps) that consist of rough dots may not be reproduced with smooth gradations. 
In such case, leave this check box blank. Enabling or disabling this feature does not 
affect print speed.

NOTE: On Macintosh OS X, [Image Enhancement] appears when [Feature Sets] is set to 
[Set 2].

Enabling this feature prints with less toner and thus the colors become lighter. Use 
this feature to save toner when printing documents that do not require high image 
quality.

NOTE: On Macintosh OS X, [Draft Mode] appears when [Feature Sets] is set to [Set 2].

Sets whether or not to skip blank pages during printing.

NOTE: On Macintosh OS X, [Skip Blank Pages] appears when [Feature Sets] is set to [Set 
2].