Xerox Phaser 5335 Guide De Montage

Setting the ESC/P Mode

69

There are two types of control panel menus: the mode menus and common menus. 
The mode menus are the menus that relate to the emulation modes. The common 
menus are the menus for all the other features of the printer.

The common menu items that relate to the ESC/P emulation mode are as follows:

Reference: For more information about the common menu items, refer to the 'User 
Guide'.

To display this item, select [Admin Menu] > [Network / Port].
This item allows you to set the ports to be used in the ESC/P emulation mode.

• Port Status (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)

Enables the ports to be used in the ESC/P emulation mode. By default, all ports 
are set to [Enable].

• Print Mode (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)

Sets the print mode of each port to [ESC/P] or [HexDump]. By default, all ports 
are set to [Auto].

NOTE: [Print Mode] allows you to set the method of processing data received from host 
interfaces. If you set this to [ESC/P], the printer will not auto-switch languages.

Press the <Menu> button

ESC/P 

extension

menu items

PCL 

extension

menu items

PostScript

extension

menu items