Xerox Phaser 5335 Mode D'Emploi

7.1 Replacing Consumables

141

Replacing the Print Cartridge

When the print cartridge is near or reaches the end of its life, the following message appears

on the printer’s control panel.

Note
• The printer can be set to stop printing when the print cartridge has run out of toner. You can configure

this setting on the control panel. Under this setting, the [Replace Toner Cartridge] message appears on

the control panel. For details on how to configure the setting, refer to "[Toner Life]" (P. 99).

WARNING

• Do not use a vacuum cleaner for cleaning the spilled toner. Use a broom or a damp cloth

to clean any spills.Vacuumed toner within the cleaner may be ignited by an electrical

spark and may cause injury.

• Never throw a print cartridge into fire. Remaining toner in the cartridge may catch fire

and cause burn injuries. If you have a used print cartridge, contact your local Xerox

representative for its disposal.

CAUTION

• Keep the print cartridge out of reach of children. Should toner be swallowed, spit it out,

rinse mouth with water and drink plenty of water. Consult a physician immediately.

• When replacing the print cartridge, be careful not to spill the toner. In case of any toner

spills, avoid contact with skin and clothing, as well as inhalation and contact with eyes

and mouth.

• In case of any toner spills onto your skin and clothing, wash with soap and water.

Should toner particles get into your eyes, flush with plenty of water for at least 15

minutes until the irritation is gone. If necessary, seek medical treatment from a doctor.

If toner particles are inhaled, move to a location with fresh air and gargle with plenty of